100% printable Screw Clamp

Hand screw clamp fully printable, almost without support. (Only one piece needs a little bit of support) The jaws can be open up to 86mm (3,38") You can print it in PLA but i recommend PETG. Please use support for printing the "Shortarm Pivot". But only from the buildplate!! All parts are orientated as they are intended to be printed. I include a stl with a set of all screws you need. Parts to print: 2x Longarm 2x Shortarm 1x Handle 1x Jaw Longarm 1x Jaw Shortarm 1x Nut 1x Shortarm Pivot (needs support) 1x Spacer25mm 1x Spacer15mm 1x Screw Set UPDATE 18-5-18: modifed the chamfer for the thread of the nut. UPDATE 25-5-18: increased the play in the threads on the following parts. jaw-longarm, jaw-shortarm, nut, shortarm-pivot, spacer15mm, spacer25mm Hope you like it :) If you interested in using this commercially, please contact me.