2-axes Clock, 59 cm wide

The diameter of this sturdy wall clock is 38 cm, and its width is 59 cm. All parts can be printed on Ender 3 sized bed. Printing it consumes roughly 600 grams of PLA.

It is compatible with Euroshaft high torque mechanisms for 5 mm thick front plate. If you buy the hands instead of printing them, the minute hand should be appr. 16 cm long. If you print the included hands, note that the fitting is tight, so you may need to carefully enlarge the holes of the hands. If the minute hand feels too thick, you can carefully widen its hole on the underside or print a thinner hand by sinking it 0.4 mm below the bed in the slicer.

Note: Use the spacer under the clock mechanism nut. Scale its height according to your need.