3DeMe | MT270 System | Steeldarts scoring system (compatible with Autodarts software)

3DeMe | MT270 System | Complete solution with base plate, WLED control & sound insulation

With these advanced 3D print files you can create your own professional, fully modular darts scoring system:

• Automatic dart recognition via camera
• Compatible with LED lighting from Mission Torus 270
• Optional with BASE PLATE & SOUND INSULATION
• Optional with integrated control and power supply

The system is designed for use with software such as Autodarts and is optimized for use with common 3D printers.The system is designed for use with software such as Autodarts and has been optimized for DIY construction with common 3D printers.

The system is controlled by a Raspberry Pi, which is located directly behind the board. The system works reliably with just one 12V connection - no cable clutter!

---

🧩 Modular base plate with sound insulation and electronics holder
The newly developed 3D-printed base plate is completely modular and can be customized. You decide which components you want to integrate:

• Raspberry Pi
• WLED control for the base plate
• WLED control for the LED ring
• USB switch (e.g. for mouse, keyboard, etc.) - HDMI input & output)
• HDMI input & output
• USB input & output
• 12V jack connection for the central power supply

An effective sound insulation can be installed as an option, which decouples the dartboard from the masonry or other surfaces - this significantly reduces noise and vibrations.

The innovative tensioning element (with/without sound insulation) allows the dartboard to be rotated continuously and fixed in the center. The tension can be fine-tuned at any time - without the need for disassembly.

Thanks to the sophisticated design, the base plate remains expandable even after installation - ideal for future upgrades.

---

📷 Stable camera mount
The mount is shatterproof, backlash-free and compatible with various camera modules (see below). A rotating lens cover protects against dust when not in use. All components are connected using the tongue and groove principle and additionally screwed together.

The original plug connection of the LED lighting can be integrated directly into the holder (without cutting or soldering) up to a diameter of 12 mm - for a tidy and professional appearance.

All important connections are built directly into the camera holder - for a clean setup without cables hanging down.

---

📦 Scope of delivery of the STL data

• Modular base plate with sound insulation and electronics holder
• Camera holder (compatible with LED lighting from Mission Torus 270)

---

📏 Size of the system:

• Total diameter approx. 80 cm

---

🖨️ 3D print details

• Included PDF with recommended print settings & assembly instructions

---

🔩 Required standard parts

• Included PDF with parts list
• Price list for screws and threaded bushings (sets can now be ordered directly from 3DeMe)

---

📷 Compatible cameramodules

• GXIVISION OV9732 | 100 degrees | 1MP
• GXIVISION OV2735 | 100 degrees | 2MP
• GXIVISION IMX179 | 100 degrees | 8MP
• HBVCAM OV9732 | 100 degrees | 1MP
• HBVCAM OV2710 | 100 degrees | 2MP
• HBVCAM IMX179 | 100 degrees | 8MP
• And many more - all cameras with identical 4-point mounting grid also fit

---

ℹ️ Note on trademark use
The name "Mission Torus 270" is used here exclusively to describe compatibility.
It is expressly pointed out that "Mission Torus 270" is a registered trademark.
It is used without any claim to trademark rights, purely to illustrate the functionality.
The Autodarts software mentioned in the text is a registered trademark. Here, too, there is no business connection to the rights holder.