6 Armed chandelier

EU Plug Cable: https://tinyurl.com/y7fgxs2v

Socket: https://tinyurl.com/y8ympa3u

Light bulb: https://tinyurl.com/yb4r9gze

Screws: 3,2 x 25mm
3,9 x 35mm (you can probably have some bigger, the screw head was a bit too small)

I had the cord laying from before.

I recommend to hang it up with some hooks but I did not think of that before I printed it, so I had to use a strip around the chord. See the last image.

So the "Fastener_Top_fixed.stl" should have high infill or some extra bottom solid layers.

Putting it together time-lapse: https://youtu.be/NDJJMJ2-ckE