Aerith's Garnet Rod

Dangerous Ladies' 3D models for Aerith's Garnet Rod.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Pre-sliced for printing pieces on a 250x250x250mm bed, but many will fit much smaller. It finishes 60" long. 

This kit utilizes a1/2" PVC pipe cut 52.75" long for an internal core. You can adjust this length to make the staff longer or shorter by omitting the printed "handle" piece and instead just wrapping the exposed PVC pipe in fabric, leather, etc. (You can also scale the printed handle piece vertically only to change its length, but you'll need to do the math to figure out how much to shorten/lengthen it relative to your pipe!)

You can make it collapsible with our screw locks. Just cut the PVC pipe to these measurements: 412mm (just shy of 16 and 1/4") for center handle, and 467mm (18 and 3/8") for the top and bottom.

I've included domes for the materia, but if you want to resin cast them or purchase glass cabochons, any 5/8" dome will work.

Files include:

• Photos
• .STL files

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

DANGEROUSLADIES.CA