Automatic Dice Tower

All 3DTechDesigns STLs are protected under Copyright Law.
When purchased on Cults3D you have the right to print it for personal use.
To legally sell prints of my designs a monthly active subscription on patreon is required:
https://www.patreon.com/3dtechdesigns

---

REEL:
https://www.instagram.com/reel/DLVZBq5s0-L/?igsh=YzIwdWp2Y2JqZzho

After a lot of testing I am happy to finally release a new mechanical dice tower. What makes this dice tower special, is that it rolls the dice fully automatically by a simple up and down movement of a lever. A platform moves the dice upwards, where they are then dropped back down by a trapdoor.
It does not matter how quickly the lever is operated because the trapdoor onto which the dice are thrown always opens at exactly the right moment.

Assembly:
The assembly is great fun due to its simplicity. A large part of the mechanism is print-in-place designs, meaning it comes fully assembled and functional from the print plate. No extra tools or glue are needed because everything is printed.
As can be seen in the pictures, two versions of the tower are included, one of which does not require the print in place planetary gear, thus reducing the number of printed parts.

Assembly-guide on youtube:
https://youtu.be/CQ-179IuEYM

Dimensions of the assembled tower:

• 119x140x133mm

Minimum printbed size:
140x140x140mm

Amount of filament needed:
~400g of PLA