BANDOPROOF 2 // FIX MOUNT// HORIZONTAL Prototype PG5 // GOPRO9-13

Bandoproof 2 FPV drone mount
GoPro full size 9/10/11/12/13 🚀

Please read this description and the printer info below carefully. If you have any questions please contact me on my Instagram @yannik.fpv or send me an email: [email protected]

❗️ Even if the mount is called "Bandoproof" and is designed as thoughtfully as possible, it does not protect the cam from every external influence. Too hard crashes and tolerances on the part of GoPro can still lead to a defective cam - nevertheless I think we have the best FPV drone mount.

Compatibility: The mount is designed for all GoPros 9,10,11, 12 & 13. Please note: Since the GoPro13 has not changed compared to its predecessors, the files remain the same. Therefore, I have adjusted the graphics for better understanding, but the file names can still be the same as before (...GoPro9-12...), as these will, of course, also include the GoPro13.
The Fixmount is designed for the PG5 from Prototype.
❗️❗️❗️ when printing please check the sliced model and if the base is properly connected to the mount. On some slicers these specific files seems to bug if not properly sliced.

🗃 The download includes:
The mount in the angles 20/25/30/35°



💥 Additional Screen-Protector: I have designed a screen protector for this mount that additionally protects the front screen. This can simply be clicked into the mount. Just have a look here. You will find all the information there.

😎 ND-Filter:
I recommend the use of TBS-ND filters with this mount. The mount is also compatible with the CameraButter BlackDiamond filters. If Screw-On ND filters are used (which replace the actual lens cover), they must not be larger (32mm x 32mm). I highly recommend the use of slide-in ND filters as they provide additional protection for the cam and are significantly cheaper to purchase and replace.

⚙️ Supported exposure settings:
The mount can of course be flown with all camera settings. Under certain conditions, the mount can be seen in the corners:
4:3 + Wide + Hypersmooth:off -> slightly visible
16:9 + SuperWide + Hypersmooth:off -> slightly visible
->As long as you are using ANY ND the mount shouldn't be in view at all.
8:7/7:8 -> visible but disappears after exporting to 16:9 & 4:3
With all other setting combinations the mount is not visible
I recommend recording/exporting with 16:9+wide / 4:3+linear





To conclude: Thank you from the bottom of my heart for all your support. I really put a lot of heart, soul & time into these projects. I'm always open to feedback and suggestions: Just write me a DM on Instragm. If you are as enthusiastic as I am: Post a story, post or reel and tag me. ❤️