BANDOPROOF 2 // Fix Mount //ImpulseRC Echo // DJI Action 2

Bandoproof 2 FPV drone mount
DJI Action 2 🚀

Please read this description and the printer info below carefully. If you have any questions please contact me on my Instagram @yannik.fpv or send me an email: [email protected]

❗️ Even if the mount is called "Bandoproof" and is designed as thoughtfully as possible, it does not protect the cam from every external influence. Too hard crashes and tolerances on the part of GoPro can still lead to a defective cam - nevertheless I think we have the best FPV drone mount.

Compatibility: The mount is designed for the DJI Action 2.
The Fixmount is designed for the Echo Frame from impulseRC.

🗃 The download includes:
The mount in the angles 20/25/30°

😱 This mount goes beyond anything ever done for an action cam! The list of features is long, so here are the key highlights:

• 4x Air-filled Bumpers that absorb impacts from all directions, providing superior protection.
• Sideplates (available for separate download) that reinforce the mount like a protective shield.
• Airbag at the back of the mount that protects both your LiPo (for FPV drones) and the camera's screen.
• Screen Saver – an air layer between the mount and the screen reduces the chance of anything pressing directly against the display.
• Air Channels for Passive Cooling allow airflow through the mount, cooling the camera on hot days and protecting it from overheating during 4K/120fps recordings. While overheating can still occur, this cooling system offers a unique, never-before-seen USP for the camera.
• Vertical Mounting Option enables you to easily install the DJI Action2 battery pack, allowing for charging without having to remove the camera.
  ...

💥 Additional Side Protector:The mount follows a completely new concept: It consists of the main mount (which you see here) and is designed to offer maximum protection while remaining as comfortable and easy to use as possible. It’s the perfect combination of practicality and efficiency.
Additionally, the SideProtectors are available for separate purchase. These provide the primary benefit of further stiffening the mount, turning it into an unprecedented shield of protection for your action cam. The sideplates come with even more features—learn more about them here.

😎 ND-Filter:
I recommend the use of TBS-ND filters with this mount. The mount is also compatible with the CameraButter BlackDiamond filters. If Screw-On ND filters are used (which replace the actual lens cover), they must not be larger (32mm x 32mm). I highly recommend the use of slide-in ND filters as they provide additional protection for the cam and are significantly cheaper to purchase and replace.

⚙️ Supported exposure settings:
The mount can of course be flown with all camera settings. Under certain conditions, the mount can be seen in the corners:
No ND + 4:3 + Super Wide + Rocksteady:off -> slightly visible
No ND + 4:3 + Wide + Hypersmooth:off -> slightly visible
->As long as you are using ANY ND the mount shouldn't be in view at all.

To conclude: Thank you from the bottom of my heart for all your support. I really put a lot of heart, soul & time into these projects. I'm always open to feedback and suggestions: Just write me a DM on Instragm. If you are as enthusiastic as I am: Post a story, post or reel and tag me. ❤️