Bone Finger Updated

Attention this file was intended with a filament printer with at least a 200x200 MM bed. There are two files set up with all the parts you would need to print an individual finger that fits on this size heat bed. That reduces the confusion of having to set up so many different parts, orientate them. You just need to add supports to the full plate files. I highly recommend printing one of these first . All of the other files in this download are from request from people who wanted to print them on resin printers or set them up themselves for individual reasons. I do not recommend doing this unless you're familiar with the file . That is why the file is so large. Updated a new longer three knuckle finger. It also has thinner side walls at the base. So it fits between your fingers a bit better .You can now print out four of these longer fingers. And use the original as the thumb. There is only one size finger for each knuckle Style. These were designed with large hands in mind or to be worn on gloves if you would like to fit your finger I would scale them down to 80% that is a good starting point. You must print multiple times.. I find using adhesive foam on the inside to size fingers accordingly helps. Finger holes are oversized. So should fit most people But no guarantees Sorry.. All models are split in half For easy printing. They must be glued together.Link to Assemble video https://www.instagram.com/tv/CBaI1zFDL3f/?utm_source=ig_web_copy_link Please personal use only no reselling.