Chronicles Of Drunagor - 2 box - All-In Insert organizer Sleeved

Insert / Organizer 3D for Chronicles Of Drunagor, in 2 boxes ! (no lift). BOTH WAVES, 1st and 2nd Kickstaters..

(If you have the big Apocalypse Horsemen bosses Minis, they obviously won't fit :P you can keep them in their own box, all the rest will fit) .

I was even able to keep the 6 boxes to store/save the heroes. See photos (don't throw them) :)

---

Instructions :

Print everything Once (except dividers, print what you need).
(EDIT : The monster mini trays have now a v2, I let the v1 in case people are still printing them)

Note : There might be things you don't need/have (like the furnitures), I advice to print them anyway if the stacks of trays moves, or there's not enough support for what goes on top of it).

Edit : I added a support lid for the Boss/DragonTray, the minis tray on top of it was not enough supported. If you're ok to put the minis layer that are on top in the photos, at the bottom instead you won't need it.
But I found out that having the minis on top is better for faster setup.

Edit 2 : Made some modifications on the Initiative Track tray so it fits for the initiative track V2 with the puzzle thing (it's longer)' sorry I own the 1st version, didn't know they changed it.
If possible print the "BigPlate" one, works on a 250mm in diagonal. If not I made another for smallplate. Thx ! :)

Edit 3 : I added 25 stl files for cards dividers, (also added 5 photos). Print what you want/need, I printed a lot (maybe too much), but you can see in the photos what it looks like.
If you sleeved be carefull of what space you have left :)
I don't have AMS, so I ended up just passing my silver sharpie on the letters, works like a charm :)

EDIT 4 : I made monster mini trays v2, after users feedback with 3d letters instead of holes, and added a slider so it became one block instead of two.
It doesn't change anything if you already printed the v1.

Did the same for black monsters called MonsterMini_Large_01A_v3
MonsterMini_Large_01B_v3

Notes : Sleeves

For the sleeves, I've got the confirmation that it fits with the official sleeves, and 60 microns sleeves. (I based the size on the 44x67 gamegenic size from BGG).
I don't know about 100microns sleeves. It's 176 x 4 boxes + 21x2 = 746mm (74,6cm). If your sleeves cards take less space than that it'll fit ! (You have to count the separators also), if it's more, it won't.

---

Mini trays :

I tried my best to fit everything in 2 boxes, following a request, that was crazy difficult with the amount of content, so note that the minis are really tight, the trays have names on them, so it's easier to store. The white monsters and gray monsters are separated, etc... but note that a lot of them are really tight, and they'll definitely touch each other. (In case you don't like that).
If you don't sleeve, you can also put the mini heroes with wings in the supp. card box.
Also it's easier to put the first layer on the bottom, and then the 2nd layer on top.

---

The largest tray is 250x140, it should work slices, but at your own risk :P
Note that I don't split the listing into multiple ones.

---

Thx and don't hesitate if there's anything ! :)

I hope you'll enjoy having more space ! :)

---

Licence Cult PU - Private Use Only