/https://fbi.cults3d.com/uploaders/14254977/illustration-file/0b2ace1e-861d-4da0-bf03-bfe7f8c2c06a/frontAll.jpg&w=828&h=828&output=webp&q=100&n=40 "Clock One 3D Printer File Image 1")
/https://fbi.cults3d.com/uploaders/14254977/illustration-file/653382e7-c1e1-44e4-bbdd-ec6fd7e2481a/aafrontClose.jpg&w=828&h=828&output=webp&q=100&n=40 "Clock One 3D Printer File Image 2")
/https://fbi.cults3d.com/uploaders/14254977/illustration-file/0beda4c5-1a44-460b-8a05-e12d87aa4415/anchor.jpg&w=828&h=828&output=webp&q=100&n=40 "Clock One 3D Printer File Image 3")
/https://fbi.cults3d.com/uploaders/14254977/illustration-file/cf1874b7-e94e-42e6-9d8d-058af2e70369/detailSideTop.jpg&w=828&h=828&output=webp&q=100&n=40 "Clock One 3D Printer File Image 4")
/https://fbi.cults3d.com/uploaders/14254977/illustration-file/228ec4e7-b9d4-4cad-b6f0-da05f1bca68c/leftSide.jpg&w=828&h=828&output=webp&q=100&n=40 "Clock One 3D Printer File Image 5")
/https://fbi.cults3d.com/uploaders/14254977/illustration-file/1c1919ac-f9bb-4804-bfca-b2d807ddff84/pendulumScrew.jpg&w=828&h=828&output=webp&q=100&n=40 "Clock One 3D Printer File Image 6")
/https://fbi.cults3d.com/uploaders/14254977/illustration-file/c42db488-5aad-4d6e-81d8-9967c8975e35/pulleyDetail.jpg&w=828&h=828&output=webp&q=100&n=40 "Clock One 3D Printer File Image 7")
/https://fbi.cults3d.com/uploaders/14254977/illustration-file/b8d64cab-cb0d-4267-967b-5e093bcf6649/pulleyGearClose.jpg&w=828&h=828&output=webp&q=100&n=40 "Clock One 3D Printer File Image 8")
/https://fbi.cults3d.com/uploaders/14254977/illustration-file/fcc0df23-e0df-407e-bb23-4613c16d0d58/rightSide.jpg&w=828&h=828&output=webp&q=100&n=40 "Clock One 3D Printer File Image 9")
December 31, 2019
Description
Clock One
This a mechanical clock that I have designed and built using 3D printed parts
Find more detailed instructions on the pdf in Files:
Clock One build instructions.pdf
It has hours, minutes and seconds, a Graham, or dead beat escapement, it is powered by weights, it has ratchets on the pulley to facilitate rewinding.
It will run for about 5 hours, there is a nut to fine tune the speed on the pendulum
See it here:
https://youtu.be/wh0CArhOsug
https://youtu.be/j6-ea6O72f4
https://youtu.be/KoyZZXEglnw
Designed with Fusion 360
Sliced with Cura
Printed in PLA on Anet A8 with Solutech 3D
Tags:
3D printed, Graham, Escapement, Deadbeat, mechanical clock
License:
CC BY-NC-SA - Attribution - Non commercial - Share alike
JacquesFavre
