Drawer inserts for Kobra X D3P bottom Riser

DO NOT PURCHASE THE MODEL - YOU CAN GET A DISCOUNT CODE TO GET THESE FOR FREE BY WATCHING FRENZi3D's excellent assembly video. Here is the link: https://www.youtube.com/watch?v=P7VXovl2buY

How to get the inserts for free:

1. Watch FRENZi3d's excellent assembly video;
2. Note the code
3. enter the code at checkout to get 100% off the model.

This model is for a custom Kobra X drawer insert kit.

The kit is custom sized to fit the brush, nozzle cleaner and the hex keys that come with your Kobra X.

To find out more about:

D3P Kobra X bottom riser: https://cults3d.com/en/3d-model/tool/d3p-bottom-riser-for-anycubic-kobra-x

D3P Kobra X overhead mount: https://cults3d.com/en/3d-model/tool/d3p-overhead-mount-for-anycubic-kobra-x

PRINT SETTINGS

Two sets are provided. A set for use with the P1S, P2S and X1C D3P riser and a second set for use with the H2 series D3P riser.

IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing.

EACH BUILD PLATE HAS THE TYPE OF SUPPORT REQUIRED INDICATED ON THE BUILD PLATE DESCRIPTION (TREE AUTO, TREE MANUAL OR NO SUPPORT).

I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.

CHANGELOG

If there are any changes to the STL files or print settings I will list them here. I recommend looking at this section prior to printing as it is the only way I can inform users of changes.

3D PRINT SETTINGS

I use the following settings and materials to print this model:
Infill % : 15% (no need for more)
Nozzle diameter: 0.4 mm
Layer height: 0.2 mm standard
Material: PLA or PETG

TROUBLESHOOTING

All parts and the assembly have been tested multiple times (both printing and assembly).
• Make sure your build properly cleaned and free of grease and oils before printing. This is the cause of adhesion.
• Make sure you use my print profiles/settings (the .3mf file that has multiple plates with all the parts) and that you enable support as indicated for each build plate on the build plate description.
• Filament and printer will affect tolerances however all should fit. If unsure proceed slowly and cautiously.
• If there are any changes I list them in a changelog on the model page. Please have a look at it prior to printing in the event there are any changes.

I am available to assist with any issues with this model.

The best way to reach me is through Facebook messenger – my user name is “Darren 3d print”.

I thank you for your support and hope you like this model.