/https://fbi.cults3d.com/uploaders/13485604/illustration-file/6fa523ec-de2f-4d8d-9206-f2f5445bf914/IMG_2875Crop.jpg&w=828&h=828&output=webp&q=100&n=40 "Dyson DC44 Exhaust Deflector Duct 3D Printer File Image 1")
/https://fbi.cults3d.com/uploaders/13485604/illustration-file/92650b5f-1dc8-4984-a84a-f7ad2f31cfb7/IMG_2876Crop.jpg&w=828&h=828&output=webp&q=100&n=40 "Dyson DC44 Exhaust Deflector Duct 3D Printer File Image 2")
/https://fbi.cults3d.com/uploaders/13485604/illustration-file/e6b4c1af-cce6-4263-a962-f72abf6fe033/IMG_2877Crop.jpg&w=828&h=828&output=webp&q=100&n=40 "Dyson DC44 Exhaust Deflector Duct 3D Printer File Image 3")
/https://fbi.cults3d.com/uploaders/13485604/illustration-file/91db5297-edc0-412d-8233-40b314feb6ca/7af340852ebd6a3f1ff90d70573db904.png&w=828&h=828&output=webp&q=100&n=40 "Dyson DC44 Exhaust Deflector Duct 3D Printer File Image 4")
March 24, 2021
Description
This is my version of the Dyson Exhaust Duct (http://www.thingiverse.com/thing:868329) by jgschmidt.
I took his design, made the walls 1mm thicker (now 3mm), and incorporated two expansion sections in the locating collar.
The expansion sections were included after I made Jürgen's design, tried to fit it to my DC44, and the raised fins on the motor exhaust split the locating collar.
This was redrawn from scratch on Fusion 360
Just be careful fitting it - IT IS STILL REALLY EASY TO SPLIT IT!!
It is much better if you print it using rigid.ink's Flexible PLA. No splitting during fitting or if it gets dropped or knocked, etc. :)
License:
CC BY-NC-SA - Attribution - Non commercial - Share alike
Sue3DDesigns
