Ender 3 External Electronics Case

This is a copy of the "Ender 3 External Electronics Case with SD card" by Enjoytheride but I removed the hole to mount the switch because in my install it would be against the side of my enclosure and my lights are controlled digitally anyways.

This will house your Electronics and screen to the left of your printer far enough to get it outside an enclosure. It also has a slot to put an SD micro to SD Card adapter. It uses all the stock screws so no need for any additional ones but you will want some small zip-ties to help you bundle stuff.

Install Notes:
You will need to extend your Z stop wire for this to work, you can buy the parts to build a new one, or just cut the old one and splice a piece of wire to make it longer. If you want to make longer wires the Ender 3 uses 2.54mm JST-XH Connectors and you can buy a whole kit of them for about $12 or less depending on the amount included. It reuses screws already holding your components so no additional ones should be necessary.

I have included all step files so you can make additional modifications yourself.