KETE | Pendant Light E27 & E26 fast print

**KETE | Pendant Light E27 & E26 fast print** **Want to buy a physical 3D print of this product? Head to [Trajann online store](https://trajann.com/collections/chr-design).** Pushing further my newfound 3D printed wickering technique with this stylish pendant light. It prints very fast and is much stronger than a vase-mode print. I equipped the dark green version with the IKEA super-size LED light bulb MOLNART. The effect is stunning! Note that the orange version was the first draft, and the weave is much coarser, which led to printing issues. The final version has a tighter weave that prints beautifully. Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle. (See settings below) There are **2 sizes available**: - a **larger one** with Ø 255 mm x H 240 mm - a **smaller version** that can print on PRUSA printers, and is Ø 209 mm x H 215 mm You can pick between **2 thicknesses for the weave**: - **0.5mm weave:** fast-print, but can be a bit fragile - **0.9mm weave:** for a stronger and cleaner weave This lamp works with **E27** and **E26** socket screws. You can get the power cords from Amazon here: For Europe: E27 cord:  https://amzn.to/3OVrZjK For the US: E26/E27 cord:  https://amzn.to/3V5VYJB Happy printing! **DIMENSIONS (Large) |** Ø 255 mm x H 240 mm **DIMENSIONS (Small) |** Ø 209 mm x H 215 mm **PRINTING |** Shade ~2.5h **Bulbe socket |** E27 or E26 **UPDATE (V6 or so...):** You can now pick between 2 thicknesses for the weave: - 0.5mm weave: fast-print, but can be a bit fragile - 0.9mm weave: stronger and cleaner weave