Lovesac Sactional Riser

In today's age of robot vacuums, furniture is not designed around a standard height or gap for said vacuums. Or, if you're like us, it seems like there is a new toy or pile of dirt being shoved under the couch every day.

We developed this riser specifically for Lovesac Sactionals to allow a Eufy G30 to move underneath the couch. This is an additional 1.5 inches added to the original 1.5 inches that Lovesac Sactionals start with. They stack and connect to the original wood shoe that comes with the sectional pieces so you don't have a ledge collecting dust and debris.

Included in the files is the matching single leg riser for use with inner corners or sections being used as an ottoman. This leg has a slight taper to it to accent the angles that the original shoe has. It is not developed to stack like the more robust corner risers.

This set of files is for personal use only. Please contact us if you would like commercial rights to sell prints (we'll likely say yes!).

Test your tolerances before you purchase! Check out https://cults3d.com/en/3d-model/tool/lovesac-sectional-riser-tolerances to test if your legs fit and if the pieces will connect properly.

Please use at your own risk. We have small children and small pets so weight outside of the couch's weight is not a heavy concern for us. But if you have large pets or are aggressive with forces on furniture, please increase the strength of this part appropriately.

Update 11 Nov 2023: We've added a 3 inch version to better accommodate some of the larger robot vacuums such as Roomba. Please feel free to reach out to us if you need a different size.

Update 15 May 2024: We've added the single leg riser that matches the larger 3 inch version for L shaped configurations.

We are working on cleaning up the mesh so it looks nice as a model as well as a print.