Mold to create clay pipe 28cm

English

With this mold and the help of a 3 mm cable we can easily create a 28cm clay pipe that meets all the requirements when it comes to smoking without problems, or simply pure decoration!

The download consists of 5 files in STL format ready to print.

To use it, fill the sides with mud, present where the presser would go, and place the 3mm cable in the center of the pipe until it makes contact with the presser head.

Remove the presser and close the mold, then insert the presser and you will see the excess of clay come out through the upper lateral holes of the mold, press well, remove the excess and let dry.

For more information on post-processing, I recommend watching tutorials or videos on mud handling.

It really is very simple to do and you can create a unique object relatively quickly.

Enjoy it! : D

English

With this mold and the help of a 3mm wire we can easily create a 28cm clay pipe that meets all the requirements when smoking without problems ,or just pure decoration!

The download consists of 5 files in STL format ready to print.

To use it, fill the sides with clay, present where the presser would go and place the 3mm wire in the center of the spout until it makes contact with the presser head.

Remove the presser and close the mould ,then insert the presser and you will see the excess clay come out of the upper side holes of the mould ,press well ,remove the excess and let it dry.

For more information on post processing I recommend watching tutorials or videos on handling clay.

It really is very simple to do and you can create a unique object relatively quickly.

Enjoy! :D