Notebook with pencil case

---

Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.

---

An elegant, robust and reusable notebook with a pen compartment.

Once you run out of blank pages you can just switch the paper out and keep the used ones stored with another rubber band.
Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups.
depending on your paper weight up to about 20 papers do fine – that will then be 80 pages.
The pen compartment is 10 mm in diameter, but it fits larger pens, too. Since the covers hold the pen in place, you can even use ones with a clip!

Versions included

• For DIN A4 Paper – DIN A5 folded in Size
• For US Letter sized paper

What you need

• The printed parts
• Two rubber bands – regular household ones
• Regular copy paper

Instructions (Go along with the images)

• Choose your version
• Choose your clip: The clip should fit into the cover with a little friction. Go for the clip_default first. If it is too tight use clip_more_clearance. If it is too loose use clip_bigger.
• Print two of the covers, the back and four clips
• Fold the paper in half (Tip: by folding them one by one the result will be slower but more precise in alignment).
• Assembly the notebook by inserting the clips and pushing them into the cut outs according to the images provided.
• Bind the pages with the rubber band.
• Insert the other rubber at the center of the back. A screwdriver or other not-too-pointy object helps here.
• Enjoy!

This is the V2, the V1 is also included as a zip