ORIGAMI PIP | Table Lamp E14, E26, E27 print-in-place

**ORIGAMI PIP | Table Lamp E14, E26, E27 print-in-place** (NOTE: this version has been entirely replaced by the [ORIGAMI STILT version](https://cults3d.com/en/3d-model/home/origami-stilt-table-lamp-e14-e26-e27-print-in-place), fixing some design issues and adding some cooler bases.) Here is a long-awaited update of the print-in-place ORIGAMI table lamp: - First, I reworked the design so there wouldn't too sharp edges, which caused some print defects in the the previous versions. - Then, **I added 2 bases that can be be "fixed" on the shade** (the shade would just rest on the base in previous versions). - the bases have thicker legs than before, no sharp edges anymore, and print very nicely. - These *bases come in low and tall versions**. - Also, **the shade comes in 2 sizes**, to fit on most printers out there. **You can use the shade with or without the base**. If without without the base, just mount your E14 or E26 or E27 bulb sockets directly where the shade's inner shell narrows into a mounting neck in the middle. **Or mount the shade on a base** and, if you fancy, even mount it all on some **table lamp stand or floor lamp stand from IKEA**. 2 shade sizes available: - **Large** version (height 250mm) - **Small** version (height 209mm) to accomodate smaller printers. Both sizes work with either **E14, E26 or E27** sockets. The middle opening fits the E26 / E27. For E14, just print 2 adapter discs (STL provided) , and place them above and below the narrow neck inside the shade. You can get the power cords from Amazon here:
 For Europe: E27 cord:  https://amzn.to/3OVrZjK
 E14 cord:  https://amzn.to/3TchBqs For the US: E26/E27 cord:  https://amzn.to/3U0Xyvy Happy printing! **DIMENSIONS (Large) |** Ø200 mm x H 250 mm **DIMENSIONS (Small) |** Ø168 mm x H 209 mm