Tank Hueforge

For the Panzer Contest 2024 on MakerWorld.

Print at 100% infill with a layer thickness of 0.08 mm and a base layer of 0.16 mm.

The model is 160x160 mm in size.
You can print with higher layer heights below the minimum depth of 0.48 mm.
The maximum depth is 2.2 mm, the actual depth is 2.1 mm.

Instructions for changing:
Start with black
Change to green at layer #5 (0.48 mm).
Change to blue-grey at layer #8 (0.72mm)
Change to natural at layer #10 (0.88mm)
Change to grey for the rest at layer #18 (1.52mm).

Tip: If you are printing with AMS, pause at #18 and change from black to gray, the important thing here is to use the color black instead of gray in the slicer, this way the printer thinks it is printing black instead of gray.

I invite you to visit my profiles on Instagram, MakerWorld, Printables and Cults3D to learn more from me or see more of my models.

Instagram: https://www.instagram.com/rbs3d_world/

MakerWorld: https://makerworld.com/en/@rbs3dworld

Printables: https://www.printables.com/@rbs3dworld_1922830

Cults3D: https://cults3d.com/de/benutzer/rbs3dworld/3d-modelle

I hope you enjoy reprinting!