Paper towel holder

A paper towel holder with a great tear-off experience. It is fully enclosed, so your towels don’t get wet and stay hygienic.

Sizes
All sizes have an additional 12 mm clearance to the sides, so slightly bigger or deformed rolls work, too. The sizes are described in the maximum Roll diameter x roll height in mm

• EU: 110 x 260
• EU Big: 150 x 260
• US: 140 x 280
• US Big: 150 x 280
• US Costco: 150 x 290
• AUS: 130 x 210
• AUS Big: 150 x 210

The center of these rolls usually has a diameter of 40 mm. The center bottom fits rolls from 38 – 43 mm in diameter. For bigger rolls there is an adapter sleeve included that lets you use rolls up to 48 mm in inner diameter. It works with all three sizes described above.

Instructions

• Choose your version
• Print all parts
• Optional: Print the TPU feet and glue them into the bottom, you can also use store bought rubber feet with a diameter of up to 8 mm.
• Push your roll onto the center bottom
• Insert it into the bottom while already guiding the first paper towel through the slit
• Add the top to the center top and connect them with the screw
• Place the top assembly onto the bottom assembly while guiding the paper towel through the slit.

Usage

• Place one hand on top so you can use or block the rotation.
• Unroll the Paper towels until the perforation slightly sticks out.
• Block the rotation and tear off the paper at an angle.
• You can retract or push out the paper with the knob on top
• If your roll gets stuck, you can use the center notch to grab it.
• If it is stuck even further inside, you can lift the top half of the assembly to fix the paper towels in place.