Pilot and Seat for RC A-4 Skyhawk by HOLOMODELS RC

Pilot and seat for my A-4 Skyhawk.

https://cults3d.com/en/creations/a-4-skyhawk-remake-by-holomodels-rc-vase-mode-no-retractions

      There are two pilots in this download, one looking straight forward, and one to the left. I made a seat for him as well. I included both pilots as STL's, and also fused both of them to the seat if you want to print them each in one piece. 
      I included factory files and G-Codes to be able to print these guys and their seats out of E-Sun, SainSmart, and Colorfabb Active Foaming LW-PLA. The pilot weighs about 1.1 grams, and the seat about 1.2grams.

       These pilots were remixed from SHADOWVFX's "Fighter Pilot for Freewing 64mm F-14 Tomcat". Available here:

https://cults3d.com/en/3d-model/art/fighter-pilot-for-freewing-64mm-f-14-tomcat

 I opened his hand up and put a PC joystick in his hand, bent the tube from his mask closer to his chest, then turned his head to the left a little and pulled his arm in some. I also turned him into a solid and cleaned up the joints from the previous remix along with some other minor details. The bottoms of the pilots are flat if anyone wants to use them in other projects. The seat is also flat on the bottom, but the back of it is cut at an angle to be able to fit into my vase mode A-4 cockpit with printable clear canopy and HUD.