ROTATING WIND SPINNER

Print your own hypnotic wind spinner in single or dual color! Single color STL-file is 1 mm thick, dual color is 0,5 mm thick, just mount them together in your slicer software and use preferred colors. Print the wind spinner simply flat without support or brim and attach the included shaft by first pushing it into the top hole, then rotating it 180 degrees and attaching it to the middle hole. Using pliers - making it easier, rotate the shaft 180 degrees and then attach it to the bottom hole. Then tie a fishing line to the loop at the top for easy hanging. Done! Let the wind or torsion of the fishing line rotate the wind spinner.

The wind spinner has a major diameter of 210 millimeter. Rotate it flat 45 degrees if needed to make it fit on the building plate or simply scale it after your printer build plate dimensions.