SAN | Pendant Light E27 & E26 fast print

**SAN | Pendant Light E27 & E26 fast print** Meet the SAN pendant light, using 3D printed wickering technique. It is perfect as a dining room pendant. Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle. (See settings below) This lamp works with **E27** and **E26** socket screws. It comes in 2 version/sizes. The large one has a diameter of 256mm. The smaller one has a diameter of 208mm. You can get the power cords from Amazon here:
 For Europe: E27 cord:  https://amzn.to/3OVrZjK
 For the US: E26/E27 cord:  https://amzn.to/3V5VYJB Some of you will wonder why the ring for the light bulbe in the middle of the top section looks like two half circle interlocking each other. The reason isn't mechanical, but I designed it this way to have a continuous inner loop, so a cleaner first layer and faster print. The printer doesn't have to create several loops and jump between them, leaving blobs and causing printing issues. Instead, the inner loop is all uninterrupted and will give you a much cleaner and faster first layer. Happy printing! **DIMENSIONS (Large) |** Ø 256 mm x H 200 mm **DIMENSIONS (Small) |** Ø 208 mm x H 200 mm **PRINTING |** ~1h for each part **Bulbe socket |** E27 or E26