Soldering Fume Remover

3D Printed Soldering Fume Remover! How cool is this! Awesome!

Here is a list of things you need for your soldering fume remover:

Switch: (Keep in mind, if you don't want 50 of them, use one off an old electronic device.)

https://www.amazon.com/Uxcell-a12013100ux0116-Position-Vertical-Switch/dp/B007QAJUUS/ref=sr_1_1?s=industrial&ie=UTF8&qid=1478552983&sr=1-1&keywords=Vertical+Slide+Switch%2C+0.5+Amp%2C+50V+DC%2C+1+Piece%2C+3+mm

For a fan I use a PC RadioShack 12VDC 0.16A Fan size 80mm by 80mm by 25mm but they do not sell it anymore. I found a fan that will work. If you want to save some money, you could try to find a recycled PC fan from an old computer:

https://www.amazon.com/uxcell-Terminal-Computer-Desktop-Cooling/dp/B00H8W7DVW/ref=sr_1_fkmr0_1?s=pc&ie=UTF8&qid=1478554349&sr=1-1-fkmr0&keywords=80mmx25mm+2+Terminals+Cooling+Fan+DC+12V+0.13A+for+PC+Case+CPU+Cooler

Now for the Power Supply. The power supply needs to provide enough power for your pc fan. Here is one that will work for the fan above:

https://www.amazon.com/Accessory-USA-Converter-Adapter-Charger/dp/B00VT5QEC8/ref=sr_1_cc_4?s=aps&ie=UTF8&qid=1478554453&sr=1-4-catcorr&keywords=DC+12V%2C+0.6A+Power+Adapter

For a filter I used a goat milk filter. You could use a paper towel or a Carbon Pad. Better to use a Carbon Pad - not to mention its cheaper:

Carbon Pad:
https://www.amazon.com/Deep-Blue-Professional-ADB41002-Activated/dp/B004HSOWRS/ref=sr_1_3?ie=UTF8&qid=1478555793&sr=8-3&keywords=Carbon+Pad

Goat Milk Filter:
https://www.amazon.com/Ken-Ag-Nongauze-Disk-Inch/dp/B001CCQWOS/ref=sr_1_2?s=pc&ie=UTF8&qid=1478555290&sr=8-2&keywords=goat+milk+filter

For screws I use recycled screws. Make sure that the screws your use will work. If you use a carbon pad then you will need longer screws:

https://www.amazon.com/Traxxas-Screws-3x15mm-Washerhead-Self-Tapping/dp/B01E4W6N1E/ref=sr_1_12?ie=UTF8&qid=1478556204&sr=8-12&keywords=screws+15mm+by+3mm

That's it! Thanks for reading all that :)