Star Guardian Lux - League of Legends

3D Printable Staff of Star Guardian Lux from League of Legends. Should be easy enough to print and assemble. The star needs support at the bottom in all versions. Included is the Staff and Wall hooks!

I made 2 versions to fit different printers, the multipart part blade fits on an ender 3. Full version fits on a CR10 (300x300x400)

The multipiece wing only needs support if printed in 1 piece.

Or just print it smaller, Full size is quite big.

All pieces need to be glued and the following pieces need to be printed multiple times:

• Star wand Holder 2x
• Star Strengthener 4x
• Wall Mount 2x

Core rod and strengthener instructions:

• Print the Core 1-5 as it comes, do not print it upright! ( same with star Strengthener)
• Glue together the core rod first as numberd (better to use a 2 part glue compared to super glue) make it as straight as possible, its a tight fit!
• Slide on the Grip and place it center, then place on the Star holders on both ends.
• The length of core that sticks out should be even on both ends.
• Inside the bottom of the Star head are 2 holes, insert the Star strengtheners all the way inside.
• Test fit both of the Starheads at the same time before Glueing (again, prefer 2 part glue compared to superglue!)

I like making models, feel free to leave a comment with feedback or if you need any help.

Also love seeing makes :)