Thai Temple

This Bird Feeder is inspired by Thai Temples. Inside Seeds can be placed for little Birds. Bigger than a Sparrow will not fit ;-) . It can be hang up using the eye on top, but it can also be placed on the ground. It took me around 93 hours to print this model. In total I used around 670 gram of Filament.

see this Bird Feeder in action: https://www.youtube.com/watch?v=9B2UnoVdNvI

Note that in addition to the Filament you also need an M3x45mm Bolt and Nut.
To give you an Idea how all the Parts come together, I included 8 Images in the Photo Section. They show the assembly of the Bird Feeder in 7 steps. The Glue I used was Super Glue, but any Glue that glues plastic will work. It is recommended to mount “roof top.stl” (using the M3 Bolt & Nut) before gluing on “base.stl”. It is easier to tighten the Bolt when “base.stl” is not in place yet.

If you have any questions, feel free to ask :-)