Unicorn Piggybank

# Unicorn Piggy Bank - A Magical Way to Save! 🦄💰 https://youtube.com/shorts/ZEViEURMuss?feature=share Say hello to the **Unicorn Piggy Bank** – the cutest and most magical way to store your coins! 🦄✨ Designed with love and creativity, this 3D-printed piggy bank adds charm to any room while making saving money fun and exciting. Whether you're a unicorn lover, a 3D printing enthusiast, or looking for the perfect whimsical gift, this is for you! 🎁 --- ## Features - **Mane & Tail Customization:** The mane and tail can be printed in a different color (I recommend rainbow). The mane slides over the head, and the tail is a snap fit! - **Secret Storage Horn:** The hollow horn comes off via twist-lock, allowing you to hide a cute note or some extra money inside! - **Customizable Eyes:** Choose from 6 different eye designs, including hearts, dollar signs, cute eyes, stars, and X shapes, to personalize your unicorn piggy bank! - **Easy Coin Retrieval:** Screw-off Plug for effortless access to your savings. - **Whimsical Unicorn Design:** A charming, fantasy-inspired piggy bank that brings joy! 🦄 - **Perfect Size:** Designed to fit on desks, shelves, or nightstands while holding plenty of coins. --- ## Filament Used - **Eryone Rainbow PLA:** [Check it out here](https://amzn.to/42Vprtw) - **Sunlu White:** [Check it out here](https://amzn.to/4hPahuh) - **Sunlu Gold Silk:** [Check it out here](https://amzn.to/4gAn4zy) --- ## Print Time - **Mainbody:** 8h, 250g - **Mane and Tail:** 5h30, 140g - **Horn:** 1h, 18g --- ## Print Settings ### Mainbody: - **Layer Height:** 0.2mm - **Walls:** 2 - **Top/Bottom Layers:** 5 top, 3 bottom - **Infill:** 5% gyroid - **Support:** Tree support required for flat section on unicorn’s back: - On build plate only - Support critical regions only - Remove small overhangs ### Mane and Tail: - **Layer Height:** 0.2mm - **Walls:** 2 - **Top/Bottom Layers:** 5 top, 3 bottom - **Infill:** 5% gyroid - **Support:** Mane requires tree support: - On build plate only - Remove small overhangs - **Tail:** No support needed ### Horn: - **Layer Height:** 0.2mm - **Walls:** 3 - **Top/Bottom Layers:** 3 top, 3 bottom - **Infill:** 15% gyroid - **Brim:** Recommended --- ## Assembly Notes - Remove the support. - Slide the mane over the head like a helmet, starting at the forehead. Add glue if you want it permanent. - Twist the horn into place using the twist-lock mechanism. - Insert the snap-fit connector into the unicorn’s butt and push the tail into it. - Add your desired eyes and snap them into place. - Twist the plug into place. --- ## Ideal Use Perfect as a piggy bank, desk decor, shelf decoration, or a thoughtful gift for unicorn lovers and 3D printing enthusiasts. This makes the perfect gift for kids—be the cool uncle!. 🎀 --- ## Added Files Documentation - **1_mainbody_doubleChin_easier_overhangs.stl**: STL file, with changed Chin Geometry, to be easier to print, with nicer overhangs - **1_mainbody_doubleChin_easier_overhangs.3mf**: 3mf file, with changed Chin Geometry, to be easier to print, with nicer overhangs - **1_mainbody.3mf**: Bambustudio 3MF File, with correct settings, ready to print - **1_mainbody.stl**: STL File, you need to Slice it yourself - **2_Mane_and_Tail.3mf**: Bambustudio 3MF File, with correct settings, ready to print - **2_Mane_and_Tail.stl**: STL File, you need to Slice it yourself - **3_Horn.3mf**: Bambustudio 3MF File, with correct settings, ready to print - **3_Horn.stl**: STL File, you need to Slice it yourself - **4_Eyes.3mf**: Bambustudio 3MF File, with correct settings, ready to print - **4_eyes_v1.stl**: STL File, you need to Slice it yourself - **4_eyes_v2.stl**: STL File, you need to Slice it yourself - **4_eyes_v3.stl**: STL File, you need to Slice it yourself - **4_eyes_v4.stl**: STL File, you need to Slice it yourself - **4_eyes_v5.stl**: STL File, you need to Slice it yourself - **4_eyes_v6.stl**: STL File, you need to Slice it yourself