Valentine picture frame

#VALENTINEXCULTS

Hey there,
Here is a wonderful picture frame for your Valentine !
Fits papers size 10cm x 15cm (4" x 6")

This multicolor print can be done easily by pausing your printer and change filament at specific layers. All parts can be assembled with a system of rails.

PRINTING TIPS
STLs named with a number have to be printed together.
When you import them on your slicer, choose them together and they should already be in place :
"0 black" from layers 0 to 2.6
"1 green" from layers 2.6 to 3.2
"2 black" at layer 3.4
"3 red" from layers 3.6 to 4
"4 black" at layer 4.2

Just pause your printer at theses layers so you can change colors !
The name of the files are the colors I use but you can of course let your creativity decides !

You can print "Cover" and "Stands" separately.

ASSEMBLY

The front side can be easily assemble to the cover by sliding it from the top. Do the same for both stands on the back of the cover.

You can put your picture inside by sliding it from the top.
Internal width is 152mm.

I hope you will like this design, don't hesitate to ask if you need help and you can post your makes so everyone can see your masterpiece ! :D