Wrist Rest Pads Mold

This is a mold I created which can be used to make carpio-style wrist rest pads (just the pads- one right set and one left set; the bases can be found on Thingiverse or MakerWorld) using silicone mixed with corn starch and a color pigment if you like. Once printed, I apply a thin layer of resin to the surface and cure it well. Then you can apply a thin coat of petroleum jelly to the inside of the mold before compressing your silicone mixed well with pigment and corn starch. Use a clamp (or 4) to compress the mold and allow for the silicone to set before prying the mold apart with a screw driver and trimming the pads in place (trimming them in the mold is easier than taking them out and trimming them).