Alpacino HueForge Portrait

Description

 

Alpacino's portrait with HueForge.

 

The file should be ready to be sliced, printed with Bambulab X1C, so if you want to print with different printer, plate or colour, make the necessary adjustments.

 

Instructions:

 

Project: Alpacino.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 107.3x150mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.1mm and the Actual Depth is 2.1mm

 

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA Bambulab Basic Dark Grey Transmission Distance: 5 (Actually Sunlu PLA+ Dark Grey) 
    PLA BambuLab Matte Ash Gray Transmission Distance: 1.4
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

 

Swap Instructions:
    Start with Charcoal
    At layer #7 (0.48mm) swap to Dark Grey
    At layer #22 (1.08mm) swap to Ash Gray
    At layer #30 (1.4mm) swap to Ivory White for the rest.

 

 

Can be done with other colours too but I prefer matte as the colours are more settle and you can see it better.

 

If you are not sure or you need any help do not hesitate to contact me.

Boost MeIf you like my work, boost me :)