Large 2x Scale Brick Ferrari F40

Large 2x Scale Brick Ferrari F40

 

Here, you will find all the required files and instructions to print your own upscaled F40 brick model. All parts have been designed and tested for printing using Bambu PLA Basic filament.

Boost MeIf you like this model, please consider leaving a boost! It helps me create more models like this one.

What You Need:

• Red PLA (Body)
• Black PLA (Chassis)
• White PLA (Wheels)
• Orange PLA (Lights)
• Glue (optional)

Although the bricks snap together, I recommend using glue to secure them.

How to Build This Project:

1. Download the print profile (.3MF file).
2. Download the instructions.
3. Print the plates.
4. Assemble the parts according to the instructions.

Tips:

• If you are using a different printer or filament brand than Bambu, start by printing the first few parts of the instructions and check the fit. If it's too tight, reduce the flow. If it's too loose, use glue.
• When printing, keep the parts organized by plates by storing them in separate bags or boxes. This will make it easier and faster to locate the parts during assembly.
• If you struggle to fit the wheels on the axle, scale them down in Bambu Studio and reprint.
• For any other tight parts, reduce the flow in Bambu Studio and reprint.
• If your parts are warping, try adding supports to all parts. 
• If a step in the instructions is unclear, try searching for the original instructions online.

If you have any questions about the model, please leave them in the comments below, and I will answer as soon as I can.

 

Enjoy the build!

 

Explore the full lineup: 2x Brick models