Logitech G29/G920 paddle shifters

This is a paddle shift system designed for the Logitech G29/G920 wheel to be used with larger diameter flat rims. 3 paddle variants are included.

The mounts replace the stock paddle shifters using the same bolts. I recommend pre-tapping the mounting holes in the mount legs with an M3 tap or using the stock bolts as it will make it easier to locate the holes when fitting this part. 

Each version of the mounts comes with 2 variations; one which uses M3 heat inserts to mount the paddles, and one which simply has the bolt screwed into the plastic. When fitting them to the wheelbase, the mounting legs will be very snug as they go into the steering column, as there's a rubber bushing it sits under. You may find tilting the mount a little will allow it to slip under the bush and then it will slide in fine.

Print both the mount and paddle at 60% infill and you'll find it as stiff and responsive as the stock paddles, with no flex. I've designed this around my 330mm wheel, but the paddles have a slot for the mounting screw to allow adjustment to a larger size.