Tarot Cards Set with Box - Major Arcana

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

MembershipC3D Commercial Membership - Authorized Merchant

 

Let me start by saying that the model is separated into many profiles due to the size limit that MakerWorld imposes on our profiles <200 MB.
If that hadn't been the case, I would have fit the entire thing, including the box, in a single profile. In fact, that's what I have done previously and had to redo it all due to this limitation!

With that out of the way, let me introduce you to my Major Arcana Tarot Set:
This “handcrafted” tarot set of 22 cards brings a unique blend of elegance and mystique to your readings. Featuring a striking rose gold finish and intricate linework, each card feels like a small work of art. The deep black backgrounds contrast beautifully with the metallic highlights, giving the cards a timeless, magical aura. From The Hanged Man to The Lovers, the traditional symbols are reimagined with a bold, artistic twist, making them perfect for collectors and tarot enthusiasts alike. Whether you're a seasoned reader or new to tarot, this set is designed to inspire deeper connections and captivating interpretations with every draw.

The whole set can be printed WITHOUT AMS, just use one of the "NO AMS" profiles!

The cover art for the box is glued on top of the lid. made it this way to ensure fewer supports and the possibility for the folks without AMS to print the cover art too. Not to mention that I dislike flat 3D prints. I mean, what's the point of it being 3D then... am I right!?

 

 

 

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle - EXCEPT FOR THE COVER WHICH IS 0.2)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

• NOW WITH 0.2 NOZZLE PROFILE READY FOR DOWNLOAD - USE FOR BEST RESULTS 
   
• Please be warned that printing the whole set with a 0.2 while well worth it will take A LOT of hours!

 

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Jayo Silk Copper Transmission Distance: 1.1 / Amazon
PLA Kingroon Black Transmission Distance: 0.4 / Amazon
PLA Kingroon White Transmission Distance: 6.9 / Amazon

Color Pallete:

Swap Instructions(CARDS):
Start with Silk Copper
    At layer #4 (0.4mm) swap to Black
    At layer #11 (1.76mm) swap to Silk Copper
    At layer #15 (2.08mm) swap to WHITE for the rest.
Swap Instructions(Cover Art):
Start with Black
    At layer #11 (1.76mm) swap to Silk Copper
    At layer #15 (2.08mm) swap to WHITE for the rest.

 

Boost MeEnjoying this model? Give it a boost! 🌟 Your support helps my creations reach more makers—thank you for keeping the magic alive! ✨🚀