January 17, 2025
Description
I love you | Otter | HueForge
Boost MeI'm happy about a boost
If you resize the model make sure you do not scale the Z axis or the print colors will not be in the same position
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Beige
At layer #14 (1.2mm) swap to Jade White
At layer #17 (1.44mm) swap to Red for the rest.
License:
Standard Digital File License
SwissPineapple
