Modular rotating stand

Upgrade your desk setup with this customizable and modular rotating stand, designed for convenience and versatility, It can hold a variety of items, including phones, trays, baskets, headsets. No additional components or glue are needed, everything is fully 3D-printable and designed to easily snap together.

• Trays are available here: https://makerworld.com/en/collections/4398818
• Baskets are available here: https://makerworld.com/en/collections/4517492
• Headset stand is available here: https://makerworld.com/en/models/1020028#profileId-1001077
• Phone holder / stand is available here: https://makerworld.com/en/models/1026574#profileId-1008855

Important Notes:

• This stand is not intended for heavy loads.
• Use a towel when attaching the bars to the connectors, as the connectors have slightly sharp edges.

Printing Tips:

• Use stronger filaments like carbon fiber (CF) for the clamp and connectors.
• PLA works well for all other parts.
• Support structures are only needed for printing the clamp, all other parts can be printed without support.
• Beams are required for printing the bar.
• If you need to create space between two arms, you can print a spacer and position it between them.

Updates:

• 2025/01/18: Add arms connector (supports up to 4 arms) and detachable arms
• 2025/01/20: Update detachable arms / connectors geometry - add spaces to make easier attachment and detachment on the connector and bar
• 2025/01/21: Add headset support
• 2025/01/22: Add phone support, arm extension
• 2025/01/23: Add rotating arm.
• 2025/01/25: Tighter connection on tray / basket support