Bondhus Torx Drive - Skadis Holder

A companion piece to the original metric Bondhus balldriver holder for Skadis pegboards by Paul_295951 on Printables, and the matching SAE balldriver holder by CinnamonToast Lunch. I use both of those, but I needed a matching holder to go in between them to hold my Bondhus torx drivers as well. I've included .step files as well as .stl so it's easier to modify if you need to do so. I've also added a small chamfer to the holes for the torx drivers shanks since they aren't rounded like the balldrivers and the chamfer helps them go in easier, but you can't see it from the outside, so the visual style still matches.

I also printed labels for all of the driver holders on clear label tape, and I'll include the exact settings and spacing I used in case you want to replicate that. I used a Brother P-Touch PT-D210 with 12mm clear TZe tape, and while these settings may well work on other Brother P-Touch printers, I can't make any guarantees. My settings were as follows:

Font - Helsinki
Size - Small
Width - Normal
Style - Bold

METRIC DRIVERS
1.5mm (1 space) 2mm (3 spaces) 2.5mm (4 spaces) 3mm (8 spaces) 4mm (11 spaces) 5mm

TORX DRIVERS
T25 (9 spaces) T20 (8 spaces) T15 (5 spaces) T10 (5 spaces) T9 (5 spaces) T8 (4 spaces) T7 (3 spaces) T6

SAE DRIVERS
5/32 (9 spaces) 9/64 (8 spaces) 1/8 (6 spaces) 7/64 (4 spaces) 3/32
Then switch to the exact same settings, but ½ width text.
5/64 (1 space) 1/16 (1 space) 0.05