A Lone Tree In A Field

3D Printing Instructions and Details :D

This model was printed with 100% infill and a layer height of 0.08mm, with the first layer set to 0.16mm for a strong and smooth foundation.

• Model Dimensions: 67.5x135mm
• Minimum Printable Layer Height: 0.32mm
• Maximum Depth: 2.2mm
• Actual Depth of the Model: 2.16mm

Filaments Used:
This print uses 3 unique PLA filaments from GeeTech (You should use other Filaments, but Geetech is the cheapest one for me):

• Black: Transmission Distance 0.6
• Grey: Transmission Distance 2.5
• White: Transmission Distance 5.6

Swap Instructions:

1. Begin the print using Black filament.
2. At layer #8 (0.76mm), swap to Grey filament.
3. At layer #14 (1.24mm), switch to White filament and continue to the end.

This ensures a precise multi-colored print with smooth transitions at the specified depths.

You can use this print however you want without paying or asking.
If you do have Questions or feedback, dont hesitate to write a comment or message me directly. 
Greetings Joshua