Pisa Tower-shaped Nespresso Capsule Container

参考比萨斜塔的模型，我设计了可以存储胶囊咖啡的容器。

有三个通道可以放置不同口味的咖啡，每次享用咖啡前，可以旋转模型主体，选择您想喝的口味。

Referring to the model of the Leaning Tower of Pisa, I designed a container that can store coffee capsules.

There are three channels for holding different flavors of coffee. Before enjoying coffee each time, you can rotate the model body to choose the flavor you want to drink.

 

模型尺寸：总高364mm，塔主体直径约98mm，转盘主体直径约120mm。

内部设置有三条通道用于可以放置胶囊。

Model size: total height is 364mm, tower body diameter is about 98mm, turntable body diameter is about 120 mm.

There are three channels inside for holding capsules.

 

模型制作需要用到如下配件：

The following accessories are needed for model making:

1. 8毫米的滚珠，8颗，用于旋转部分机构，8 mm ball balls, 8 balls, are used to rotate part of the mechanism.
2. 直径8mm，1mm厚的磁铁，6片，用于胶囊容器的盖子部分。Magnet with a diameter of 8mm and a thickness of 1mm, 6 pieces, used for the lid part of the capsule container.
3. 长度15mm~25mm M2螺钉，3枚，用于紧固塔主体与转盘之间的配合。3pcs M2 screws with a length of 15mm to 25mm are used to tighten the fit between the tower body and the turntable.

底座脚垫是用TPU打印，也可以不打印或者用别的材料打印，这个不妨碍旋转使用。

The base foot pad is printed with TPU, or can be printed without printing or with other materials. This does not hinder the use of rotation.

我上传了组装指南，供参考。

I uploaded the assembly guide for reference.

 

部分旋转结构借鉴了以下链接的作品，特此说明。

Part of the rotation structure draws on the works linked below, which is hereby explained.

amzaldua | 已发布 - MakerWorld

Boost Me如果您喜欢我的作品，请您为我助力，谢谢。
If you like my work, please boost me, thank you.