Standing Triple Hearts

A nice decoration for Valentine's Day.

Note : Don't scale it, the filament will not fit in anymore

You will need around 200mm of clear filament (or any other color

Note : Try to insert the filament in each hole to be sure everything work fine before.  The red parts in the picture is looser, it's normal, it's for easier assembly.

Easy to assemble !

1. Insert a piece of clear filament in the middle to join all the hearts for a “floating” look.
2. Cut the excess filament.
3. Clip the frame in the base.

I put 4 plates for the middle hearts (the white one on pictures).  Just choose your favorite one.

• 1 plate for only hearts contour 
• 1 plate for full hearts
• 1 plate with “Me, You, Love” text
• 1 plate with “I, Love, You” text
• You can also change the words if you want :)

You can load you clear filament in the AMS if you have one.  The extruder will make some indentations in it.  I found that it give a good “grip” so the hearts doesn't slide easily.

If your hearts are too loose and slide down, put a mini drop of glue on the filament (where the heart is suppose to be) and slide the hearts on it.

For me, they fit just fine, not too loose, not too tight without need of glue.

Happy Valentine's Day