Jägermeister Folding door box

This is my second Folding door box. The first one was made for circular bottles such as wine bottles. (Wine bottle box here LINK)

This one however is made for a 1 liter Jägermeister bottle. It fits like a glove inside and makes for a fun gift wrapping.

The logo and text is embedded in the walls, you can choose if you want to print in multiple colors or just paint with a permanent marker. It's very easy either way, but by printing in one color and using a marker you save both time printing and filament. The green one in the pictures is printed in 2 colors and the gray one is printed in one color and then painted with a permanent marker.

There is a total of 42 printed parts incl. the pins for the center pieces and the knobs. I also added a plate with 2pcs 6mm rods, these are so that you can assemble the whole box without steel rods. But i recommend getting steel for durability.

Magnets for holding the door closed can be bought in bambu's maker supply store.

Steel rods need to be æ6mm and 28cm long.

Steel rods: Buy here (affiliate link)
This is an affiliate link — I may earn a small commission if you buy through it, at no extra cost to you. It helps support my future designs.

Each individual part is marked with a number making it very easy to assemble using the added assembly guide below.

Hope you have as much fun printing and assembling as i did.

If you like it, please make a comment and if possible add a picture of the printed model. And if you like my stuff consider following me.