Spool Label ID and Filament CLIP - ALL-IN-ONE

READ FIRST !

• Compatible with Bambu Labs spools. Also works on Elegoo cardboard spools. You may resize for other spools.
• Print it with a 8mm BRIM
• No need for supports :) 
• You can use the integrated print profile (its the Standard 0.20mm but with added 8mm brim).
• Clean you build plate !

This All-in-1 Spool ID and Filament Clip uses the labels that are on the BambuLabs Spool/refill boxes.

No need to print multiple tags to ID your spools !

Simply cut the labels out of the boxes, resize it to 53mm x 75mm (2-1/16" x 3")  and slide the label onto the clip (see pictures for easy sizing).

But wait … that's not all!  There is also a built-in filament clip !

Only works with standard 1.75mm Bambulabs filaments. 

Tested multiple times using the Standard 0.20mm print profile. 

*** YOU NEED TO ADD A BRIM ***  ( I use 8mm and it works fine as long as your build plate is clean !)

If you're like me and you trew away your boxes/labels, you can use the following web site to print the labels you are missing.

Please note that BambuLabs or me are NOT affiliated with this website. https://bambu-labelgen.socuul.dev/

Please don't hesitate to share your experiences or constructive comments as this is my first ever published model.

If you like it, consider giving me a boost !