a1mini边盒 收纳盒 竹屎收集

尺寸178.7*110*37，薄款为178.7*120*37

我另加个竹屎收集，所以高度设到37mm。没有加竹屎收集的话可以加高，直接在切片取消等比例缩放加高就行。

设计初衷，即便加了竹屎收集，还是不少小的耗材弄得周围都是，所以这个实测几天后，桌面都没有耗材丝

2025-01-20更新：新增薄款边盒，挡板更改无底款，废料直接掉落盒子内更方便。

  关于挡板：这款挡板尺寸偏大，因为我打petg较多，废料比较韧，比较q弹，小尺寸的有卡料的几率。如需小尺寸的可以找一下其它作者的作品。

Dimensions: 178.7 * 110 * 37 mm and 178.7 * 120 * 37 mm

I have added a bamboo waste collector, so the height is set to 37 mm. If you do not add the bamboo waste collector, you can increase the height by simply canceling the proportional scaling in the slicing software.

The original design intention was to minimize the waste material that gets scattered around, even with the bamboo waste collector added. After testing for a few days, there is no waste material left on the desktop.

Update on January 20, 2025: A new slim edition of the edge box has been added, and the side panel has been changed to a bottomless version, allowing waste material to fall directly into the box more conveniently.

Regarding the side panel: This panel is larger in size because I print a lot with PETG, which produces tougher and more elastic waste material. There is a higher chance of jams with smaller-sized panels. If you need a smaller size, please look for works from other authors.

If you have any additional requests or need further assistance, feel free to ask!