One Piece - The SK Brook Wanted Poster

These One Piece wanted posters have a ton of texture and a light metallic shine to them!

All of my Hueforges are printed with the following settings. Adjust at your own descretion, but I cannot guarantee details will not change.
Height Range Modifier from 0 to 1.0 using 0.20 mm layers and a 0.20 mm first layer. I then follow the millimeter guidance rather than the Layer# guidance, as the layer # will be incorrect with use of height range modifiers.  If you don't want to do this or do not understand this, just use the details outlined in the describe.txt below.

Project: skbrook.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.20mm

The Model is 152.9x230mm in size
You may print at higher layer heights below the Min Depth of 1.4mm
The Max Depth is 3mm and the Actual Depth is 2.4mm

Filaments Used:
    PLA Bambu Metal Oxide Green Transmission Distance: 0.4
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyLite Pro Cold White Transmission Distance: 0.5
    PLA Bambu Basic Gold Transmission Distance: 2.8
    PLA PolyTerra Army Red Transmission Distance: 0.3
This print uses 5 unique filaments

Swap Instructions:
    Start with Oxide Green
    At layer #11 (1.24mm) swap to Black
    At layer #15 (1.40mm) swap to Cold White
    At layer #19 (1.56mm) swap to Gold
    At layer #29 (1.96mm) swap to Army Red for the rest.