Flower Bouquet Mechanical Sculpture

Hello! 

This is my first attempt at a mechanical sculpture so i'm eager to hear your feedback! 

Please read the assembly guide down below for how to assemble.

Please see assembly instructions for how to assemble. There are 20 X 8mm x 2mm magnets in the design the pauses are below - 

Stems 2.8mm Pause 5 X magnets Downwards Polarity

Main Body Lower 2.6mm Pause 5 X Magnets Downwards Polarity 

                                5.2mm Pause 5 X Magnets Upwards Polarity

Main Body Upper 42.8mm Pause 5 X Magnets Upwards Polarity

Quantities of Components (They are all colour coded in correct quantities in the 3MF file) - 

Main Body Lower x 1
Main Body Upper x 1
Motor Circlip x 4 
Red x 1 
Small Leg x 10 
Leg With Cable Route x 1 
Leg x 9 
Bevel Gear Circlip x 15 
Small Flower Main x 5 
Small Flower Center x 5 
Large Flower Center x 6 
Large Flower Main x 6 
Large Thread x 11 
Small Thread x 5 
Petal Center x 5 
Petal Main x 5 
Motor Mount x 1 
Bevel Gear Small Thread x 5 
Bevel Gear Large Thread x 10 
Drive Gear x 1 
Drive Gear Circlip x 1 

Below are the links to the compponents I used - 

1 X Motor - https://uk.store.bambulab.com/products/n20-single-shaft-worm-gear-motor   

1 X Power Supply - https://www.amazon.co.uk/dp/B09DNX42CQ?ref=ppx_yo2ov_dt_b_fed_asin_title 

15 X Bearings Small 14 x 5 x 5  605ZZ - https://uk.store.bambulab.com/products/micro-steel-deep-groove-ball-bearings?id=41796148756540 
 

1 X Bearing Large 22 x 8 7.5 x 1 608ZZ - https://uk.store.bambulab.com/products/micro-steel-deep-groove-ball-bearings?id=41796149149756 
 

20 X Magnets 8 x 2mm - https://uk.store.bambulab.com/products/round-magnet?id=41713754570812 

Let me know what you think and thank you for reading! 
 

Happy Printing :D