hueforge Diam's

Project: Diam's.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 152.02x150.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA PolyLite White Transmission Distance: 5
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #14 (1.2mm) swap to Yellow
    At layer #17 (1.44mm) swap to White
    At layer #22 (1.84mm) swap to Jade White for the rest.