Bed scraper lamp

Bed scraper lamp

There's not much to say here 😁

 

It is a decorative lamp in the shape of a bed scraper with the inscription "BambuLab"

 

The lamp is divided into 3 plates. The front and back parts are stuck together (optionally with a little glue in between).

The BambuLab logo/lettering is on the 1st plate. This can be applied in both directions.

 

 

 

Optionally, the lamp can be attached to the wall using 2x brackets.

The brackets are screwed on at a distance of 20 cm (hole to hole) and the bed scraper is attached.

 

 

 

There is a groove on the underside for attaching the LED strip. There is also a recess to stow cables and connectors.

The groove is 8 mm wide and 5 mm deep. I use this LED lighting (approx. 1.3m are needed).

 

 

 

Whether it is worth the filament and the printing time is something everyone has to decide for themselves 😎

I think it's a great decorative object, which can beautify a printroom setup …

 

 

 

If you like my models and profiles, you can support me with these options:

• Leave a Like 👍
• Leave a comment ✒️
• Download the file ⤵️
• Boost the model 🚀
• or buy me a coffee ☕😊

 

This model & print profile as well as the finished print may not be used for commercial purposes. Unless, of course, you are in possession of an active license (offline or online). 

MembershipCommercial license available for sale via MakerWorld.

Have fun printing 😎

 

For more models, please have a look at my profile…