Build Plate Holder X1 P1｜Fast, Simple and Low Cost

Overview

This fast, simple, and low-cost build plate holder is designed for Bambu Lab X1 Carbon, X1 Carbon Combo, P1S, and P1P. The holder features a lightweight design that minimizes filament usage, prints quickly, and can be easily installed using double-sided tape.

Additionally, the staggered design ensures that the stored build plates are easy to see and retrieve.

Features and Highlights

• Fast, Simple, and Low-Cost
   Prints quickly, features a simple design for ease of use, and consumes minimal filament thanks to its lightweight structure.

   

• Staggered Design for Visibility and Easy Retrieval
   The build plates are stored in a staggered manner, making each plate visible and easy to access.

   

• Space-Saving Installation
   Securely fix the holder to your desk or workspace using 1 cm wide double-sided tape (recommended), and place your 3D printer on top to make the most of your available space.

   

• Flexible Design for 1–5 Plate Storage
   Choose the appropriate model to match your needs, from 1 plate (6 mm height) to 5 plates (24 mm height).

Parts List

Optional Sizes (Left and Right)
- 1 Plate (6 mm height)  
- 2 Plates (10 mm height)  
- 3 Plates (14 mm height)  
- 4 Plates (20 mm height)  
- 5 Plates (24 mm height)  

• Left Build Plate Holder × 1  
• Right Build Plate Holder × 1  
• Double-sided tape** (1 cm wide recommended, not included)

Instructions

1. Choose the appropriate model based on the storage height you need (1–5 plates).
2. Print the **Left Build Plate Holder** and **Right Build Plate Holder**.
3. Hold both the left and right holders in your hands, and place a build plate between them to secure it.
4. While holding the build plate in position, place the holders at the desired installation location (desk or workspace).
5. Use double-sided tape (1 cm wide) to fix the holders in place. Ensure the build plate fits securely in the holders.
6. Place your 3D printer on top of the holders to stabilize the setup further.
7.  

8. 🔥 my favorite other models 🔥
   Easy-Clean Debris Tray for Bambu Lab P1	Your Avatar - Customizable Figure
   Part Cooling Fan Filter for Bambu Lab X1 P1	Washable Aux Fan Filter For Bambu Lab X1 P1
   Side Extension Kit(Drop-Resistant) for Bambu X1 P1	Kawaii Mini Storage
   Washable Fan Filter with Frame	Washable Fan Filter without Frame
   Build Plate Holder X1 P1	Spool Holder Bearing Upgrade Kit
   Washable PSU Air Vent Filter For Bambu Lab X1 P1	Washable Fan Filter For Bambu Lab X1 P1
   PC4-M6 Tube Extender / Inline Coupler for PTFE	Shutter-Type USB Soldering Iron Storage Case
   ⚡️Customizable models⚡️
   Washable Fan Filter with Fram	Custamizable 3DPaper Text & Braille