hair dryer holder

Please read through everything so that there are no misunderstandings!

 

I have designed a hairdryer holder for the windowsill and would like to share it with you.

The inner diameter is 82mm. The hairdryer lies “crooked” in the holder, making it visually straight and easy to remove.

 

The holder is printed from PLA Basic, with my settings there should be no problems.
I split the model into two parts for printability! As you can see from the pictures, the parts are joined together using superglue. The bolt/hole connection only serves as a guide. They are not designed as a press fit.
The thickness of the window sill must be 20mm.
The screw is tightened with an 8mm hexagon and does not have to be screwed in all the way, tighten with feeling and see if the holder is stable.

 

I have also uploaded other projects in the same design, you are welcome to take a look at this model too!

hair straightener -->  https://makerworld.com/de/models/1029873#profileId-1012464

cable holder -→ https://makerworld.com/de/models/1055292#profileId-1042682

screw-on hooks -→ https://makerworld.com/de/models/1087195#profileId-1080128

 

 

I would love to hear your feedback!

Feel free to show me the printed parts, and check out my other models :)

 

Boost Me1 boost = 54g filament for my next project :)