Chamber Temp Bed Cable Cover

This is a remix of the Bed Cable Cover from the Ender 3 NG v1.2 that allows the installation of a thermistor. It will allow for the general temperature of the enclosure to be read. The temperature at print height will be slightly higher than the temperature at the thermistor but the difference will be negligible if you have an air purifier, such as the Bentobox, circulating air through your enclosure. Supports are required for under the overhang due to the circular passthrough. The model should have the supports already painted on but in case they don't transfer, the location is marked with working settings included in the last picture.    

This is the thermistor used.      

The original project, by RH3D.

Update 1/31/25 - Added file to support glass bead style thermistors that are used in hotends like the Mk8. If you build the NG you likely have one of these lying around, so its a free chamber temp sensor!